• +91-22-67745700
  • aspee@aspee.net
Aspee Logo

An ISO 9001:2008 Certified Company

Testing of constant flow valve for agricultural type knapsack sprayer (LOK) with different types of nozzles

The lever operated knapsack sprayers are most popular among the farmers in India. It delivers uneven flow with a highly variable droplet spectra and spray pattern. There are C.F. valves available in developed countries, which controls output pressure and the flow. Keeping in view these objectives, the present study has been conducted at Aspee Research Institute, Bhiwali, Dist. Thane. A constant flow of valve of 1.45 kg/cm2 pressure is tested with duro mist spray hollow cone nozzle and plastic hollow cone nozzle at different applied pressures for Knapsack Sprayer (LOK). For Knapsack Sprayer (with duro mist spray hollow cone nozzle and C.F valve of 1.45 kg/cm2 ) at 1.45 kg/cm2 applied pressures the nozzle discharge, cone angle, volumetric efficiency and uniformity coefficient are varied as 318 to 320 cm3/min., 76 to 77°, 85.50 to 86.00% and 1.93 to 2.0 respectively. In case of Knapsack Sprayer (with plastic hollow cone nozzle and C.F. valve of 1.45 kg/cm2 ) at 1.45 to 4kg/cm2 applied pressures the nozzle discharge, cone angle, volumetric efficiency and uniformity coefficient are varied as 329 to 335 cm3/min, 76 to 77°, 84.84 to 85.00% and 1.94 to 1.99 respectively.

The valve pressure, discharge, cone angle, uniformity coefficient is found nearly constant (In both nozzles with C.F. valve) irrespective of applied pressures.

Source

Agriculture Sprayers and Dusters by ASPEE Group Of Companies, India. www.aspee.com

Resource Box

This article is written by Shri. Shrikant Kallappa Patil of Mahatme Phule Krishi Vidyapeeth, Rahuri on behalf of ASPEE Agriculture Research and Development Foundation. ASPEE Group of Companies is the leading manufacturer and exporter of Agriculture Sprayers and Dusters

Copyright

This article is protected by copyright.

If you wish to publish/reprint any article from our site in your ezine, website, blog, forum, RSS feed or print publication, you must:

a) Respect the copyrights of the authors by publishing the entire article as it is with no changes

b) Agree to include the FULL Resource box at the end of the article

c) Agree not to change the title or content of the article in any way

d) Agree to make all links so that they are Active/Linkable with no syntax changes

e) Agree to include the article source credit below each article reprinted with the link active

Information

Contact Us


Important Links


Designed by DetaTech